Highlights:2022 to 2024, Supplier Quality Engineer: I started my position with more than 200 quality issues to solve with my suppliers. I managed to decrease this number by 4 before Jan 2024. 2019 to 2020, Industrial Launch Engineer - end of study project: "Optimization of the air/water leakage test for the electric engine.". Benefits: Annual scrap cost decreased by 20%, annual scrap rate reduced, and workstation efficiency increased by 200%. 2017 to 2019, Continuous Improvement Engineer - 2 studies projects : Project 1 was "Leakage test workstation improvement". Achievements: Using Lean Management tools such as visual management, the implementation of 5S, defining standard work procedures, and eliminating wastes (muda), along with the analysis of production KPIs from the previous year. The workstation and its manual rework station were optimized so that there is no longer any production loss due to manual rework time. The internal scrap rate for this station was reduced by 33%. Project 2 was "Workforce model improvement". Achievements: The workstation complied with the cycle time requirements, the ergonomic risk has been erased, an annual cost saving of 30 000€ and the internal scrap rate has been erased for this workstation.

Skills:Failure Mode and Effects Analysis, Root Cause Analysis, Corrective and Preventive Actions, 6 Sigmas, Lean Manufacturing, Kaizen, Risk management, APQP, Problem-Solving, Cross-Functional Collaboration, Attention to Detail, Time Management, IATF

Goal:Ready for new challenges, autonomous, and adaptable. I'm looking for an engineering position in the United States : Supplier Quality Assurance Engineer; Quality Engineer; Continuous Improvement Engineer; and Project Engineer.

Supplier Quality Engineer 08/2022 - current
TRIGO France, Trémery, France
Industry: Automotive
Currently working as supplier quality engineer for a big French group, Stellantis. I am part of the supplier quality team. The plant is producing thermal engines (gasoline and diesel) and fully electric engines. I have in charge 6 key suppliers of the electric engine: 4 Chinese suppliers, 1 Italian and 1 Spanish.
I also work with colleagues from all over the world, thus every single communication is in English. My work is focused on : Monitoring the KPIs of my suppliers and their performance (reactivity and efficiency). Rankings and escalation entry or exit monitoring of the suppliers. Avoid any recidivism. Following my supplier’s action plans to eradicate defects through weekly meetings, validating the action plan and 8D document. Raise and manage crisis cells if needed to secure the customers as soon as possible. Application of Stellantis supplier quality animation standards (GP5+, PPAP, APQP, 8D, A3, Ipk)--
Private Math Tutor 04/2021 - 08/2022
ACADOMIA, Metz, France
Industry: Education
While searching for a job after graduating, I chose to offer private math lessons through a private tutoring company (Acadomia). I get the opportunity to tutor a 9th-grade student for one hour per week.
--
Industrial Launch Engineer 09/2019 - 08/2020
STELLANTIS, Trémery, France
Industry: Automotive
Inside the new electric engine production workshop, during my last year of apprenticeship, I was able to carry out various missions such as: monitoring new diversities on the production line, create a synoptic (plan) of the line, develop a production analysis file
It was during this year that I carried out my final engineering studies project. Subject: Optimization of the air/water leakage control process for the electric engine. Main objectives: Scrap rate decrease, Takt time and cycle time improvement, cadence optimization. Achievements: Observations and field surveys, measurements and data analysis, creation of standardized documents, implementation of visual management, studies of technical solutions, Muda’s research and removal. Benefits: Annual scrap cost decreased, annual scrap rate reduced, time saving, efficiency gain--
Test and validation engineer 07/2019 - 08/2019
STELLANTIS, Rüsselsheim-am-Main, Germany
Industry: Automotive
10-week mission at the Opel parent company in Rüsselsheim-am-Main, Germany. The language spoken during this mission was English. Affected service: Calibration & Validation of Diesel Engines
Achievements: Carrying out on-board diagnostics in pre-series vehicles (camouflage car) to check the correct functioning of the engine control units. Carrying out various driving tests on the circuit (breaking test, CO2 emission test). Creation of a data analysis tool with journeys simulations of electric vehicle: Energy consumption, pollution, engine temperature, % battery usage, range in km... Softwares used : Excel, Powerpoint, AppDesigner MATLAB, DiagAlizer.--
Continuous Improvement engineer 09/2017 - 06/2019
STELLANTIS, Trémery, France
Industry: Automotive
Inside the "Maintenance and Kaizen" department of the diesel engine production workshop, my missions were mainly focused on the continuous improvement of the production line. I carried out various missions such as: updating standardized documents ( TPM frequency check, working instructions) measuring the cycle times and machine capability, creation of a bottleneck map to identify the top 5 disturbing stations, Identify and report recurrent issues and mudas (loss of production/time/money)
2 major projects during these years: 1. Leakage test station improvement. Data analysis, Definition rework rules, and rework instruction. Working station and rework area improved with 5S implementation. Visual management implemented. Software used: Excel, Powerpoint. Achievements: time saving, efficiency of the rework increased, scraps rate decreased. 2. Workforce model improvement. Achievements during study step : Field observations: time measurements, layout measurements, ergonomic impact measurements. Studies and implementation proposals for the new working station implementation. Operator satisfaction surveys. Success: Working station comply with cycle time requirement, Ergonomic risk erased, Annual saving of 30k€ Scrap rate erased.--

High school "Albert Camus" 09/2010 - 08/2013
Fréjus, , France
Degree: High School Or Below
Major:Engineering Sciences
French degree "BACCALAUREAT SCIENTIFIQUE - OPTION INGENIEUR". The Baccalaureat is the degree you pass after completing high school courses. I chose to follow the mathematics and engineering sciences program.

Supplier Quality Engineer