Highlights:I worked with a huge organization of Power Plant Construction (SEPCO3) for almost 6 years with a good reputation. I worked with Dubai Petroleum for almost 1 year and learned many International Standards. I've designed a Project (Automatic Power Factor Improvement) which was sponsored by Bahria University.

Skills:electrical operation, Energized/shutdown transformers, Rack-in and out 13.8KV VCB, Handling of Black out condition, Write standard job instructions, write corrective maintenance reports, Write preventive maintenance reports, Perform inspection of transformers, MV/LV switchgear, Perform Inspection of Battery rooms, Follow the Permit to work system, Operations of Gas Insulated Switches filled with SF6 gas, Perform IR test of electrical motors/cables, Isolate electrical equipment for the maintenance work

Goal:I want to pursue my career in a multinational organization in which I provide engineering solutions and make sure the electrical equipment works smoothly and efficiently. The organization should provide a growing environment and value my work.

Membership:I'm a member of the Pakistan Engineering Council. Registration Number (Elect/47812).

Certification:I've done a Safety certification of IOSH Managing Safely version 4.0

Honor:I was awarded as a Progressive employee of SEPCO3 in 2018.

Electrical Engineer 11/2017 - 07/2023
SEPCO3 Power Plant Construction Corporation, Ras Al-Khair, Eastern Province Saudi Arabia
Industry: Power Generation
I was responsible for the electrical operations of 13.8 KV Simoprime VCBs, Isolation of generators, and operation of GIS according to the work requirement.
I’m responsible for all electrical operations and Inspection of sites such as start-up and shutdown of electrical equipment like Step-up Transformers (18KV to 380KV, Hyundai TL2050), Distribution transformers (6.6KV to 400V), Auxiliary transformers (18KV to 13.8KV), and changeover a load of busbars (Siemens Simo-prime) for maintenance activity and in case of a shutdown. • Inspection and Operation of static frequency converter (SFC) and excitation (SEE) transformers especially for the start-up of a turbine and control of Power-factor by excitation voltages. • Perform Inspection and Operation of feeder water pumps, gas compressors, and fuel oil pumps as required. Before start-up perform the insulation test of motors and busbars to make sure the equipment will run normally. • Write the procedure and perform the Inspection and operations of UPS in different modes. • Read log sheets of the previous shift in CCR, which indicate operational work and parameters of equipment like Powers, amperes, temperatures, pressures (SF6), and humidity to make sure the readiness of all essential loads. • Regularly perform an inspection of the site to observe the operation of equipment and machinery, generators, transformers, emergency generators, etc., as well as, record & reporting any abnormalities, such as oil leakage, high temperature, and abnormal noise, to the shift supervisor. • Isolate equipment for maintenance work, including GIB (380KV), GCB (18KV), Transformers, and Busbars, and communicate all information with the Saudi electric company and with the shift supervisor about the electrical isolation. Strictly flow permit to work system and lock-out and tag-out the busbars and transformers. • Ensure a safe working environment is always adopted and any potential health & safety hazards should be reported to the department for appropriate corrective action. • At the end of every month, perform the Inspection of all electrical tools and master calibrators. • Carry out other similar duties, such as calculating running hours of various equipment to obtain historical data for maintenance purposes and changeover the load as per schedule. • Support the shift supervisor in the monitoring of SCADA operations. • According to the Schedule, Check the insulation of the Generator rotor, Busbars, Cables, and motors. • Startup and shutdown the Black Start Diesel Generators (13.8 KV) to make sure of the readiness. As per schedule, start on the 22 and 23 of every month--

Bahria University 08/2010 - 08/2014
Karachi, Sindh, Pakistan
Degree: Bachelor's Degree
Major:Electrical
Minor:Electronics
I've learned many electrical principles and formulae for the measurements of different electrical parameters, I got the concept of programming on C sharp and performed PLC programming of S700.

Electrical Engineer