Highlights:

Skills:Electrical, Commissioning, Testing, Protection, Switchgears, Transformers, Motors, DC & UPS, Batteries

Senior Field Commissioning Engineer 08/2018 - current
ESB International, Turaif, Saudi Arabia
(4x230 MW GT, 1x435 MW ST, 50 MW Solar) ISCCPP
? Testing & Commissioning of MV & LV Switchgears (13.8 KV, 480 Switchboards MCC & LDB); Make: ABB. Performed CT Test, VT Test, Meter Calibration, Scheme Check, Wiring Check, Busbar Contact Resistance, GE Protection Relay Test, Circuit Breaker Timing Test, Insulation Resistance and High Voltage testing. ? Testing & Commissioning of GCB Generator Circuit Breakers (4 Nos.); Make: GE. ? Testing & Commissioning of GSUT 3 Nos. (380/19/19 KV, 560 MVA, Alstom; 380/23.5 KV, 580 MVA, Alstom), UAT 3 Nos. (19/13.8KV, 37.5 MVA; 23.5/13.8KV, 37.5 MVA) and Power Transformers with auxiliary panels (CCC, AVR, OLTC & RTCC). Performed CT Tests, Turns Tap Ratio, Vector Group, Calibration of WTI & OTI, Functional Test of OLTC, SFRA, Insulation and Winding Resistance testing of different types of transformers. ? Performed Changeover, interlock and energization of HV and LV switchgears. ? Stability Test for Generators 4 Nos. (GE make), GSUT 3 Nos. (Alstom Make), UAT 4 Nos. and 380kV cable protection. ? Testing & Commissioning of High Speed Bus Transfer (HSBT)-Make: ABB & Auto Transfer Switch (ATS) - Make: APEP & Allen Bradley. ? Testing & Commissioning of Variable Speed Drives (VSDs)- Make: GE. Performed interlock/intertrip, DCS signals check, logic checks, energization and solo run. ? Testing & Commissioning of Batteries, Battery Chargers, Inverters and Distribution Boards. Make: Emerson. Performed Battery Charging, Discharging and Functional tests. Alarm/Trips troubleshooting for battery chargers. ? Testing & Commissioning of MV & LV Motors. Performed Megger, Winding Resistance and Solo run of motors. Checked protections for motors and troubleshooting. ? Energization of transformers, MV & LV boards, distribution boards and other auxiliary equipment. ? Grid Code Test for Generators (Excitation system open circuit response, Reactive power, OEL, UEL and generator direct axis/current interruption tests). ? Testing & Commissioning of PV system including Solar cells, batteries, chargers and inverters. ? Preparing and sending the daily down time and utilization report. ? Follow up the Unresolved Issues and Troubleshoot to resolve as to close any Open Cases. ? Documenting network changes and updating diagrams accordingly.--
Commissioning Engineer 11/2015 - 05/2018
Hyundai Heavy Industries & Co., Jeddah, Saudi Arabia
4 x 723 MW Steam Turbines, JSTPP-1
? Communication & Hardwire logics & interface checking of all Switchgears, Transformers, AVR, Protection Panels, GCB, GIB & ECMS System (YPP) to DCS (Yokogawa). Checked and modified logics, graphics & trends. ? Testing & Commissioning of Emergency Diesel Generators (3 x 8.7 = 26.1 MW) & Auxiliaries including logics (Siemens based WinCC Software) and functional test. Unit & Overall Blackout logic and functional testing. ? Testing & Commissioning of MV & LV Switchgears (13.8 KV, 4.16 KV, 480 Switchboards MCC & LDB); Make: Hyundai. Performed CT Test, VT Test, Meter Calibration, Scheme Check, Wiring Check, Busbar Contact Resistance, GE Protection Relay Test, Circuit Breaker Timing Test, Insulation Resistance and High Voltage testing. Performed testing for GCB Generator Circuit Breaker (4 Nos.); make: ABB. ? Testing & Commissioning of GSUT 4 Nos. (25/380 KV, 906 MVA, Hitachi), UAT 4 Nos. (25/13.8/13.8KV, 120 MVA), CAT 4 Nos. (25/13.8KV, 70 MVA), AT 15 Nos. and Power Transformers with auxiliary panels (CCC, AVR, OLTC & RTCC) of Rating up-to 906 MVA. Performed CT Tests, Turns Tap Ratio, Vector Group, Calibration of WTI & OTI, Functional Test of OLTC, SFRA, Insulation and Winding Resistance testing of different types of transformers. ? Protection & Interlocks checking of 380 KV GIS, GIB, GCB, GSUT, UAT, CAT & 13.8KV, 4.16KV, 480 V SWGRs. ? Testing & Commissioning of High Speed Bus Transfer (HSBT)-ABB make. ? Testing & Commissioning of HV, MV & LV SGRs (13.8 KV, 4.16 KV, 480 Switchboards PCC, MCC & LDB). ? Testing & Commissioning of MV & LV Motors. Performed Megger, Winding Resistance and Solo run of motors. Checked protections for motors and troubleshooting. ? Testing & Commissioning of Variable Speed Drives (VSDs)- Make: GE. Performed interlock/intertrip, DCS signals check, logic checks, energization and solo run. ? Testing & Commissioning of Batteries, Battery Chargers, Inverters and Distribution Boards. Performed Battery Charging, Discharging, Functional and capacity tests. Alarm/Trips troubleshooting for battery chargers. ? Changeover, interlock and energization for HV and LV switchgears. ? Developing of work permit, LOTO, Testing Procedure, Method of Statement / work instruction as per specification and safety requirements. ? Preparing and sending the daily down time and utilization report. ? Follow up the Unresolved Issues and Troubleshoot to resolve as to close any Open Cases. ? Documenting network changes and updating diagrams accordingly.--
Electrical Engineer 12/2014 - 10/2015
Mishnan Group, Industrial Services Co., Yanbu, Saudi Arabia
YNGL Plant
? Installation of cable trays, conduits and duct banks. ? Installation of electrical panels & transformers. ? Installation of grounding system and equipotential bus bars. ? Hi-pot testing of MV & LV cables & bus bars. ? Responsible to manage whole project execution from initial survey & design to handing over. Supervise initial and final survey, preparation of construction profiles, survey sheets, marking of other utilities and as-built drawings. ? Coordinates with municipality priors to work execution to avoid any future hindrances in the project. ? Prepare monthly construction schedule and follow up day-to-day activities. ? Monitoring sub-ordinates productivity to enhance their performance and ensure high efficiency and effectiveness. ? Ensure supply of manpower and equipment on site in time. ? Meeting with sub-contractors and suppliers to discuss the productivity and the targets. ? Conduct daily meeting with site in charges to discuss the work scope, inspection detail and day to day requirement of material on site. ? Responsible for the preparation of Method of Statement (MS), Inspection Test plan (ITP) and Site Test Procedure (STP). ? Liaise with client’s representative, project management and subcontractors to make sure smooth flow of project implementation. ? Providing technical assistance, direction & support to subcontractors. Field supervision for construction and installation of cable tray, conduits, cable pulling and termination. ? Perform and authorize raise working permit as per job schedule, execute various works, ensuring compliance with safety requirements.--
Commissioning Engineer 12/2012 - 12/2014
Doosan Heavy Industries & Construction, Rabigh, Saudi Arabia
4 x 720 MW Steam Turbines, RPP2
? Testing & Commissioning of Medium Voltage Switchgear, Low Voltage Switchgear, Protection Panels, Main Transformers and Auxiliary Transformers, IPB and CRB. ? Performed Testing & Commissioning of dry type and oil type transformers of different capacities ranging up-to 865 MVA. Worked on Hyundai, Hitachi, Daiki Ataka and Hyusung Transformers. Performed CT Tests, Turns Tap Ratio, Vector Group, Calibration of WTI & OTI, Functional Test of OLTC, SFRA, Insulation and Winding Resistance testing of different types of transformers. ? Testing & Commissioning of AVR, RTCC, CCC & OLTC panels for GSUT 25/380 KV (4 Nos.), UAT 25/13.8/13.8KV (4 Nos.), AT (25 Nos.). ? Performed Testing & Commissioning of 13.8kV, 4.16kV and 480V Switchgears. Worked on Siemens and Hyundai Panels. Performed CT Test, VT Test, Meter Calibration, Scheme Check, Wiring Check, Busbar Contact Resistance, GE Protection Relay Test, Circuit Breaker Timing Test, Insulation Resistance and High Voltage testing. ? Performed Insulation Resist. & High Voltage Test for IPB (Isolated Phase Bus duct) & CRB (Cast Resin Bus duct). ? Testing & Commissioning of MV & LV Motors. Performed Megger, Winding Resistance and Solo run of motors. Checked protections for motors and troubleshooting. ? Testing & Commissioning of Variable Speed Drives (VSDs)- Make: GE. Performed interlock/intertrip, DCS signals check, logic checks, energization and solo run. ? Performed Protection Relay Test and Metering tests for Protection panels and Tariff Metering Panels. Worked on GE relays including T60, M60, G60, C60, C30, SR 550 and SR339. Performed testing / communication between the relays and FOC (Fibber Optic Convertor) using GE Enervista software. ? Testing & Commissioning of Batteries, Battery Chargers, Inverters and Distribution Boards. Performed Battery Charging, Discharging, Functional and capacity tests. Alarm/Trips troubleshooting for battery chargers. ? Worked on ECMS (Electrical Control & Monitoring System), GE based protection system software. Modification of DCS Signals or logics in UR & SR3 relays. ? DCS interfacing of HV and LV panels. DCS I/O checks for transformers and protection panels. ? Performance Management & Support for the Process to troubleshoot, Resolve Technical Issues of Elect. Equipment. ? Developing of Work permit, LOTO, Testing Procedure, Method of Statement / work instruction as per specification and safety requirements.--
Electrical Supervisor 01/2010 - 08/2012
WAPDA, Faisalabad, Pakistan
240 MW Gas / Combined Cycle Power Plant (Pakistan WAPDA)
? Worked as Electrical Supervisor at 8 x 25 MW Gas Turbine + 1 x 40 MW Combined Cycle Power Plant. ? Responsible for routine and AOH of Gas Turbines and Combined Cycle Plant, 6.9 KV SWGR including Gas CBs, Oil CBs, Protection Relays, Main and Aux. Transformers, Plant Batteries, Housing Colony etc.--

National University of Computer & Emerging Sciences 08/2008 - 08/2012
Lahore, , Pakistan
Degree: Bachelor's Degree
Major:Electrical, Computer, Electronics
Electrical Engineer

Login to view resume: CV_Mubashir_Hassan - Electrical, Commissioning, Testing, Protection