Lagos Lagos, Nigeria
Phone: xxx-xxx-xxxx
Email: xxx@xxxx.xxx
Looking For: Lab Technician, Petrochemical Lab Technician
Occupation: Life, Physical, and Social science
Degree: Bachelor's Degree
Career Level: Experienced
Languages:
Highlights:• Bachelor’s Degree in Chemical Engineering • Over 5-years Laboratory experience in Quality control processes and Quality assurance analysis which involve planning, design, and operation phases in production of quality petroleum products • Knowledge of solution chemistry including aqueous solutions, halide salt solutions, glycol solutions • Analytical Chemistry. • Operating and maintaining laboratory equipment. • Knowledge of experiment in design, data analysis and validation of analytical or numerical models with test data • Knowledge of safety, health and environmental Risk Assessments • Job Safety Analysis, Hazard Identification and mitigation • General Laboratory Practices -Statistical Quality Control process, Calibration & Maintenance • Ability of Product Quality Management System (PQMS) • Loss Prevention System (SPSA, LPO etc.) • Time Management and Creative Thinking • Developing, Monitoring and Execution of Lab Opex and Capex. • SAP ERP proficient • ICP , XRF, GC and other test proficient
Skills:ASTM Test methods, Quality Control, XRF, GC, ICP, Karl Fischer, ISO 9001:2008 Lead Auditor, ISO 17025 Lead Implementer, SAP ERP proficient
Goal:• Seeking employment as a Lab Technician. • To demonstrate my knowledge and skills in chemical/process engineering and Quality Control in the operation, control, and optimization of chemical, physical, and biological processes of Company products and • To use my analytical reasoning and creative abilities to achieve set goals and to further develop my skills and collaborate across multiple teams.
Membership:• Member -Society of Tribology and Lubrication Engineers (STLE) ASTM Member: 1976519
Certification:• PECB Certified ISO/IEC 17025 Lead Implementer LMS. Certification number : LALI1007220-2015-09 PECB (Professional Evaluation Certification Board, Montreal Canada), LMS (Laboratory Management System) certified by ANSI (American National Standards Institute) • ISO 9001-2008 QMS Lead Auditor IRCA April 2015. Cert. No: LA2/15/NG/52776
QUALITY CONTROL LAB SUPERVISOR 01/2012 - current
FORTE OIL PLC, Lagos, Lagos Nigeria
Industry: OIL AND GAS
Quality Control Laboratory Supervisor
Forte Oil PLC (Apapa Plant)
1 Forte/Conoil Road,
Ijora - Apapa, Lagos, Nigeria
Duties:
• Managed Quality Assurance Process for Laboratory system
• Preparation of Cost effective lubricant formulation
• Quality control of Lube oil Manufacturing by monitoring Good Manufacturing Practices
• Quality Control/Assurance of PMS, Diesel and HHK.
• Evaluate chemical process technology and equipment, and determine production specifications.
• Oversee the construction, modification, operation and maintenance of pilot plant and processing units
• Establish and conduct quality control programs, operating procedures and control strategies to ensure consistency and adherence to standards for raw materials, products and waste products or emissions.
• Conduct economic and technical feasibility studies.
• Process Audits of Aviation Fuel
• Aviation Products Receipt and Storage
• Internal Auditor for maintenance of ISO 9001 certification in Lab
• Developing of Lab procedure in compliance with ISO 9001-2008
• Analysis of Lubes and Fuels
• Developing of guidelines and specifications
• Use of Quality Inspection Module on SAP ERP
• Karl Fischer titrations
• Developing, Monitoring and Execution of Lab Opex and Capex.
• Ensured safety in delivery of all activities--
LAB TECHNICIAN 09/2009 - .06/2010
MOBIL OIL NIG. PLC, Lagos, Lagos Nigeria
Industry: OIL AND GAS
Lab Technician Mobil Oil Nigeria Plc (NYSC program)
Apapa Plant
1 Mobil Road, Apapa-lagos Nigeria
Duties:
• ASTM Inter laboratory Crosscheck
• Using Fourier Infrared Spectrophotometer to quantify additive in Lubricants that has significant and unique absorbance and transmittance ASTM D1440 MLP 13 & AM-S872
• Determination of moisture content of Lubricant, AM-S449
• Determination of shear rate of lubricants using Lawler Brookfield Viscometer ASTM D-2983
• Determination of apparent viscosity of engine oils at temperature between -5° and 35°C (Engine cranking characteristics of lubricants).
• Determination of viscosity of Lubricant using ISL Automatic Viscometer and Lauda Manual Viscometer (at 40°C and 100°C ASTM D-445).
• Determination of Foaming Tendency of Lubricants using Normalab Dual Twin Foam apparatus, (24°C and 93.5°C) ASTM D892
• Determination of density/specific gravity of Lubricants using Manual measurement and Automatic Density Analyzer , ASTM D1298-99 and ASTM D 4052-96respectively.
• Determination of Color of Petroleum products using Stanhope-Seta Lovibond Color Comparator, ASTMD1500-03
• Determination of air release ability of turbine, hydraulic and gear oils, using Air Release Value Test Apparatus, ASTM D3427.
• Detection of Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Test, ASTM D130-94
• Determination of Water Separability of Petroleum Oils and Synthetic Fluids, ASTM D1401
• Determination of Total Base Number of lubricants using Titrino Titroprocessor, ASTM D2896-03
• Determination of flash point of lubricant and base oil (Flash point above 79°C and below 400°C) using Cleveland Semi-Automatic Apparatus, ASTM D92 (Opened cup).
• Determination of Flash point of petroleum products in the temperature range from 40°C to 360°C by Automatic Pesky Martens closed cup apparatus.
• Determination of specific gravity (at 15°C) of Petroleum products ASTM D1298-99--
UNIVERSITY OF LAGOS 02/2002 - 11/2008
Lagos, Lagos, Nigeria
Degree: Bachelor's Degree
Major:CHEMICAL ENGINEERING
Bachelor of Science in Chemical Engineering